Air Logic is a manufacturer of various pneumatic accessories. Ideal for instrumentation, medical and industrial applications. The accessories included Check Valves, Orificie Restrictors, Needle Valves, miniature Inline Filters, Orifice Filter combinations and Preset Flow Controls.
	The Inline Filters are designed for compressed air systems to remove most contaminate particles. Three models are available. An inline filter with barbs for 1/16" or 1/8" I.D. tubing, a filter encased in a 10-32 UNF housing with barbs for 1/16" or 1/8" I.D. tubing, or a filter with female 10-32 UNF threads. The filters are available in 5, 25, 43, and 73 microns. Maximum supply pressure 125 PSI. Minimum pressure drop.
	The Orifice Restrictors are designed for use in pneumatic control circuits. They are precision molded of polysulfone and available in three models: 1) Straight Ports for inline installation, 2) Available with barbs for 1/16" or 1/8" I.D. flexible tubing, or 3) Encased in a 10 x 32 UNF barbed fitting. Available in 11 various orifice diameters from .004" to 0.40". The orifices are held to flow tolerances of ±4%. Maximum pressure 100 PSI. Low cost and miniature size.
	The Filtered Orifice Restrictors are encased in a molded polysulfone housing with barbs for 1/16" or 1/8" I.D. flexible tubing. They are available in 5, 43, and 73 microns, in 10 various orifice diameters, from .004" to .030". They are precision molded of polysulfone and are held to flow tolerances of ± 4%. Maximum pressure 100 PSI. Low cost and miniature size.
	The Needle Valves are ideal for instrumentation and industrial applications. The fine angle of the needle allows for the precise control of flow. The Needle Valves are adjustalbe from 0 to the equivalent flow of a 0.025" diameter orifice. The flow is restricted in both directions. The various features include panel mounting and knurled adjustment knob, stainless steel pins. Buna-N, Viton or EDPM O'rings are available. The body is available in various materials, Phosphot Bronze, Nylon or Polypropylene.
	The Ckeck Valves permit flow in one direction only. The operation of the Check Valve is based on the movement of a small disc. The disc shifts within the housing as the pressure differential changes from forward to reverse. A flat surface on one side of the discs seals off flow, while the other side allows flow to pass. Maximum forward flow and low cracking pressure. The Check Valve is available in a chemical resistant housing made of polypropylene.
	The Preset Flow Control maintains a constant flow in one direction and full flow in the opposite direction. The operation of the Flow Control is based on the movement of a small disc. The disc shifts within the housing as the pressure differential changes from forward to reverse. An orifice restrictor is encased in the center of the disc. A flat surface on one side of the disc seals and permits flow through the orifice. Standard orifices available.
		Back to Summary Index | Home