The F-5700, F-5800 Series Pressure Piloted 3-Way Valve has an adjustable pressure pilot setpoint. The adjustable pressure pilot can be set to sense pressure between .5 to 100 PSI. Maximum supply of 100 PSI. The 3-Way Valve is Normaly Open or Normally Closed. The Normally Open valve senses the adjusted pressure setpoint and turns the output off. The Normally Closed valve senses the adjusted pressure setpoint and turns the output on.

Four mounting styles are available: The standard flush mount; the panel mount as a unique thread that goes from 1/8-27 tapered pipe thread to 1/8-27 straight pipe thread for mounting; the manifold mount is designed to mount directly on pneumatic circuit boards or manifold subplates – a Buna N o-ring is supplied; and 1/8 NPT mount which has 1/8-27 tapered pipe threads. The pilot input is furnished with a B80 Barb, 10-32 Barbed Fitting for 1/16" I.D. tubing. The output has instant push-in fittings for 5/32 O.D. tubing.
FEATURES
  • Subminiature Size
  • Low Differential
  • Fast response

SPECIFICATIONS

Mecahnical

  • Operating Speed: Activate or release in 65 milliseconds
  • Signal Pressure: 100 PSI maximum
  • Pilot Adjustment : 0.5 to 100 PSI, ± 0.5 tolerance on the initial starting pressure
  • Temperature Limits: 40º to 120ºF
    (4º to 49ºC.)

MATERIALS

  • Housing: Polysulfone
  • Diaphragm: Polyurethane
  • Spring: Stainless Steel or Music Wire
MOUNTING
  • Flush Mount: mounting hole .125" diameter, use No. 4 self-tapping or 5-40 screw
  • Panel Mount: 1/8-27 NPT to 1/8-27 NPS, 10-32 female internal threads. Mounting hole size 7/16" diameter. Supplied with mounting nut
  • Manifold Mount: Two mounting holes .125" diameter, use No. 4 self-tapping or 5-40 screw, supplied with Buna N o-ring
  • 1/8 NPT Mount: 1/8-27 male tapered pipe threads with 10-32 female internal threads

PORT CONNECTIONS

  • Pilot Input: 10-32 female threads
    1/8-27 male tapered pipe threads with 10-32 female internal threads furnished with 10-32 Barbed Fitting for 1/16" I.D. tubing

    Output: instant push-in fitting for 3/32" I.D.x 5/32" O.D. tubing