F-5100 Series Subminiature Pressure Switch

The F-5100 Series Miniature Pressure Switches interface from pressure to electrical controls circuits. They’s ideal for high pressure and low differential applications. The switch is adjustable 0.5 - 100 PSI with a maximum of 100 PSI supply. The switches have three electrical terminals: Normally Open, Normally Closed and Common. 15 AMP switches are standard. 0.1 to 25 AMP switches are available.

Four Mounting styles are available: The standard flush mount; the panel mount has a unique thread that goes from 1/8-27 tapered pipe thread to 1/8-27 straight pipe thread for mounting; the manifold mount is designed to mount directly on pneumatic circuit boards or manifold subplates - a Buna N o-ring is supplied; and 1/8 NPT mount which has 1/8-27 tapered pipe threads. The switches are furnished with a B80 barb, 10-23 Barbed Fitting for 1/16" I.D. tubing.

FEATURES

Low Cost
Subminiature Size
High Pressure Adjustment
Low Differential
Snap-Action Switch
Fast response

SPECIFICATIONS

Electrical

Switch Action: Single pole, double throw
Electrical Range: 15 AMP is standard; no accessory number required. 0.1 to 25 AMP switches are available
Electrical Switch: UL Approved
Electrical Connections:
187" quick-connect terminal

MECHANICAL

Operating Speed: Activate or release in 25 milliseconds
Signal Pressure: 100 PSI maximum
Adjustment Range: 0.5 to 100 PSI, ± 0.5 tolerance on the initial starting pressure
Temperature Limits: 40º to 120ºF
(4º to 49ºC.)

MOUNTING

Flush Mount: mounting hole .125" diameter, use No. 4 self-tapping or 5-40 screw
Panel Mount: 1/8-27 NPT to 1/8-27 NPS, 10-32 female internal threads. Mounting Hole size 7/16" diameter. Supplied with mounting nut
Manifold Mount: Two mounting holes .125" diameter, use No. 4 self-tapping or 5-40 screw, supplied with Buna N o-ring
1/8 NPT Mount: 1/8-27 male tapere pipe threads with 10-32 female internal threads

PORT CONNECTIONS

Operating Speed: Activate or release in 25 milliseconds
Signal Pressure: 100 PSI maximum