The F-5500 Series Solid State Pressure Switches interface from pressure to electrical control circuits. They are adjustable from 0.5 to 100 PSI with 100 PSI maximum supply. The Solid state Switch combines precision mechanical switch operating conveninece with solid state reliability. It uses the Hall sensor. An integrated circuit, actuated by a magnet located in the operating plunger, produces a digital output; there are no contacts.

Supply voltage is 4.5-24 VDC. The Solid State Switch is a direct interface with solid state circuits. The digital logic-level output eliminates the need for conditioning circuitry to obtain a square wave output. A terminal housing can be provided for use with AMP 102241-1.

Four mounting styles are available: The standard flush mount; the panel mount has a unique thread that goes from 1/8-27 tapered pipe thread to 1/8-27 straight pipe thread for mounting; the manifild mount is designed to mount directly on pneumatic circuit boards or manifold subplates - a Buna N o-ring is supplied; and 1/8 NPT mount which has 1/8-27 tapered pipe threads. The switches are furnished with B80 Barb, 10-32 Barbed Fitting for 1/16" I.D. tubing.
FEATURES
  • Low Cost
  • Subminiature Size
  • High Pressure Adjustment
  • Low Differential
  • Solid State Switch
  • Fast response

SPECIFICATIONS

Electrical

  • Switch Action: Solid state Hall sensor
  • Electrical Rating: 4.5-24 VDC
  • Electrical Switch: UL Approved
  • Electrical Connections:
    AMP 1-2241-1 terminal

Mecahnical

  • Operating Speed: Activate or release in 25 milliseconds
  • Signal Pressure: 100 PSI maximum
  • Adjustment Range: 0.5 to 100 PSI, ± 0.5 tolerance on the initial starting pressure
  • Temperature Limits: 40º to 120ºF
    (4º to 49ºC.)
MATERIALS
  • Housing: Polysulfone
  • Diaphragm: Polyurethane
  • Spring: Stainless Steel or Music Wire

MOUNTING

  • Flush Mount: mounting hole .125" diameter, use No. 4 self-tapping or 5-40 screw
  • Panel Mount: 1/8-27 NPT to 1/8-27 NPS, 10-32 female internal threads. Mounting hole size 7/16" diameter. Supplied with mounting nut
  • Manifold Mount: Two mounting holes .125" diameter, use No. 4 self-tapping or 5-40 screw, supplied with Buna N o-ring
  • 1/8 NPT Mount: 1/8-27 male tapered pipe threads with 10-32 female internal threads

PORT CONNECTIONS

  • 10-32 female threads
  • 1/8-27 male tapered pipe threads with 10-32 female internal threads furnished with a B80 Barb, 10-32 Barbed fitting for 1/16" I.D. tubing