The V-5500 Series Solid State Vacuum Switches interface from vacuum to electrical control circuits. They are adjustable from 1 to 28" Hg with a maximum 29.9" Hg vacuum supply.

The Solid State Switch combines precision mechanical switch operating convenience with solid state reliability. It uses the Hall sensor. An intergrate circuit, activated by a magnet located in the operating plunger, produces a digital output. There are no contacts. Supply voltage is 4.5-24 VDC. The Solid State Switch is a direct interface with solid state circuits. The digital logic-level output eliminates the need for conditioning circuitry to obtain a square wave output. A terminal housing can be provided for use with AMP 102241-1 terminals.

Four mounting styles are available: The standard flush mount; the panel mount has a unique thread that goes from 1/8-27 tapered pipe thread to 1/8-27 straight pipe thread for mounting; the manifold mount is designed to mount directly on pneumatic circuit boards or manifold subplates – a Buna N o-ring is supplied; and 1/8 NPT mount which has 1/8-27 tapered pipe threads. The switches are furnished with a B80 Barb, 10-32 Barbed Fitting for 1/16" I.D. tubing.
FEATURES
  • Low Cost
  • Subminiature Size
  • Low Differential
  • Solid State Switch
  • Fast response

SPECIFICATIONS

Electrical

  • Switch Action: Solid State Hall Sensor
  • Electrical Range: 4.5-24 VDC
  • Electrical Switch: UL Approved
  • Electrical Connections: AMP 110224-1 terminal

MECHANICAL

  • Operating Speed: Activate or release in 25 milliseconds
  • Signal Pressure: 29.9" Hg maximum
  • Adjustment Range:1 to 28" Hg
  • Temperature Limits: 40º to 120ºF
    (4º to 49ºC.)
MATERIALS
  • Housing: Polysulfone
  • Diaphragm: Polyurethane
  • Spring: Stainless Steel or Music Wire

MOUNTING

  • Flush Mount: mounting hole .125" diameter, use No. 4 self-tapping or 5-40 screw
  • Panel Mount: 1/8-27 NPT to 1/8-27 NPS, 10-32 female internal threads. Mounting Hole size 7/16" diameter. Supplied with mounting nut
  • Manifold Mount: Two mounting holes .125" diameter, use No. 4 self-tapping or 5-40 screw, supplied with Buna N o-ring
  • 1/8 NPT Mount: 1/8-27 male tapered pipe threads with 10-32 female internal threads

PORT CONNECTIONS

  • 10-32 female threads
  • 18-27 male tapered pipe threads with 10-32 female internal threads furnished with B80 Barb, 10-32 Barbed Fitting for 1/16" I.D. tubing